无需安装,吸盘吊环直接与行车吊钩连接即可
No need to install, the sucker ring can be directly connected with the crane hook.
依靠链条的松弛与张紧来控制真空产生与释放,通过真空控制阀来完成吸取,释放操作
Rely on the slack and tension of the chain to control the vacuum generation and release, and complete the suction and release operations through the vacuum control valve.
无需任何控制按钮,无需任何外部动力,不受断电或电压不足的影响
No need for any control buttons, no need for any external power, not affected by power failure or insufficient voltage.
不需要外接电线或者气管,设备可以移动至任何一个有起重设备的地方工作,且设备可以自由360度旋转
Since there is no need for external wires or air pipes, the equipment can be moved to any place with lifting equipment to work, and the equipment can rotate freely 360 degrees.
只有当工件被放下,链条完全松弛状态下,才能释放工件,不会存在误操作,所以安全性极高
Only when the workpiece is put down and the chain is completely slack, the workpiece can be released. There will be no misoperation, so the safety is extremely high.
以上图片仅供参考,以实物为准。
产品详情
产品名称及型号 Product&Model |
最大载重 Safety Loading |
外型尺寸(mm) Size |
吸盘直径(mm) Sucker Diameter |
吸盘个数 Sucker Number |
电源系统 Power System |
控制方式 Control Mode |
设备自重 Dead Load |
HP-WDL80-1S | 80KG | Φ200 X150 | Φ200 | 1个 | 无动力 | 自动 |
5KG |
HP-WDL300-1S | 300KG | Φ360 X300 | Φ360 | 1个 | 无动力 | 自动 |
26KG |
HP-WDL800-1S |
800KG |
Φ450X450 |
Φ450 |
1个 |
无动力 |
自动 |
90KG |
HP-WDL1000-2S |
1000KG |
1500X450 |
Φ450 |
2个 |
无动力 |
自动 |
220KG |
HP-WDL800-4S |
800KG |
1800X800 |
Φ300 |
4个 |
无动力 |
自动 |
160KG |
HP-WDL600-6S |
600KG |
2000X800 |
Φ230 |
6个 |
无动力 |
自动 |
180KG |
应用案例
产品视频
相关产品